PILOT FEATURES
-    imports G-code files for 3D engraving and milling
-    imports HPGL and DXF (lines) files for 2D engraving, routing and cutting
-    works under Windows 2000 or XP
-    real time display of status, time, depth, pass, tool, speed,...
-    displays the toolpath in 2D or 3D
-    saves all parameters of the toolpath for next use (also after switching the power supply off is possible to continue engraving the job)
-    displays size of application in mm and in number of commands
-    displays number of commands already made
-    user can start the job from any command (i.e. after breaking the cutter)
-    displays starting position and actual position of axes
-    matrix function for engraving in series (HPGL+DXF)
-    TEACH-IN function for free 3D toolpathes with following edit possibility
-    allows user to set compensation of axes, when needed
-    motion of machine is maximally fluent and fast
-    multipass engraving
-    double engraving (both directions)
-    first pass and last pass different
-    up to 8 tools in one toolpath with different settings of parameters
-    three ways to set the startpoint of the job
-    possibility to engrave only selected tools
-    4 speeds of manual movement for setting startpoint and TEACH-IN
-    allows user settings (dynamics, speed optimization, spindle delay, Z sensor thickness, compensation, etc.)
-    spindle ON/OFF possibility (usable for diamond dragging)
-    internal buffer for 2044 commands with fluent filling
-    4 microprocessors control electronics
-    integrated control of spindle speed
-    integrated powerful XYZ microstepping drives