 |
Camera for printmarks
Camera together with PILOT controller can find up to 4 printmarks to cut
or route preprinted plates, logos, etc. The system can rotate and stretch the original
toolpath depending on printmarks found. If you need print & cut, this equipment will
help you finding correct position. |
 |
Oscillating knife head
For cutting of soft materials, rubber, foam, leather, paperboards, etc.
The knife oscillates with frequency 3000 oscilations per minute.
This head can be combined with routing spindle on one machine (interchangeable).
COMAGRAV router equipped with both spindle and knife is universal system for signmakers.
From paperboard up to aluminium and acrylic, all you can cut. |
 |
Dust collector
Diameter of suction hose is 125 mm for 1.1 kW spindles and bigger. For
spindles 220W/550W we supply output for vacuum cleaner with diameter 55 mm. |
 |
Dust collector for ATC spindles
Diameter of suction hose is 90 mm. Automatic up/down movement for
toolchanging. |
 |
Spray cooling system
Mostly suitable for routing of aluminium and its alloys. |
 |
Grinder for carbide tools
Supplied with diamond grinding wheel for resharpening and production of
tools. |
 |
Combi-head
Oscillating knife and creasing wheel in one head. Electric oscillating
version shown on the picture. |
 |
Laser scanner
Non-contact 3D measuring unit. |
 |
Vacuum pumps
High pressure vacuum pumps with wide range of power. |
 |
Cutting tools
Micrograin carbide routing and cutting tools. |
 |
Diamond polishing tools
Monocrystalic diamond polishing tools for polishing of acrylics. |
|
Mechanical scanner
Contact 3D measuring unit. |
